🐡The outer casing is made of ABS material, which and can withstand certain gravity, effectively preventing damage caused by fish.
🌊 Excellent heat dissipation, surface hollowing design, can quickly dissipate heat into the water.
🔍Three-digit digital display, accurate to 0.1 °F, easy to grasp the temperature value and working status.
🌡Double temperature probe prevents the single temperature probe from being damaged and causing no heating or over temperature.
🛡 After the water evaporates, the heater is exposed to the water surface, it will automatically cut off the electricity.
🔥Over-temperature protection system, when the temperature in the tank is over 97 °F will stop heating, to avoid fish from boiling fish due to high temperature.
⏲Automatically remember the temperature, when used after power failure, the temperature no need to set.
☀Through the frequency conversion heating technology, and PTC ceramic materials, it can fully convert electric energy into heat energy, saving energy and safety.
Voltage: 110V-120V, 60HZ
Power cord length: 5ft+5ft
Temp Control Range: 70℉~94℉
Application: 120-180 gallon
1. When using this heating, the heating should be submersible in the water and should not be exposed to the water surface.
2. It is necessary to regularly clean and clean the heating plate. If the heating plate is attached with impurities, the heating efficiency will be reduced.
3. When the aluminum plate inside the heating plate is damaged, please stop using it.
4. Can not be used for saltwater and water with special materials.
- 🐟LED DIGITAL DISPLAY CONTROLLER: ① Displays real-time water temperature or set temperature, three-digit display, water temperature display accurate to 0.1 °F, easy to read. ② 4 kinds of work instructions – Working/Malfunction/ Thermostatic/ Out of water, easy to understand. ③ Child Lock”KEY”: need to touch 3 seconds to set the temperature.
- 🐟RAPID HEATING: Fastest 5 seconds warming, with intelligent circuit board, work with new PTC ceramic thermal conductive material, the outside is wrapped with aluminum material to accelerate heat conduction and protection. Automatically reduces power when approaching the set temperature, fully utilizes thermal energy inertia to smoothly reach the set temperature, saving energy.
- 🐟INTELLIGENT THERMOSTAT: Over-temperature protection prevents “cooking fish”. When the water temp exceeds about 93.5 °F, start alternately flashing EE fault code; and over 97℉, the heater will stop heating automatically. When the water temp cool down to 93℉, the heater will start working automatically. In addition, it has a power-off memory function and no need to set it again.
- 🐟ANTI-DRY PROTECTION: When the heating rod is exposed to air, display ER fault code and the heater will shut off automatically. When the heating rod is completely immersed in water, it will start working automatically. Effectively extend the service life. (PS: Suitable for freshwater only.)
- 🐟HIGH-QUALITY MATERIALS: Built-in dual temperature probe, real-time monitoring of water temperature, temperature accuracy of ± 1 °F; high temperature resistant ABS material, no deformation and no softening, explosion-proof and anti-corrosion, no leakage of electricity. Strong suction cup bracket, can stably fix the heater in every corner of the fish tank.