Hygger DCP controllable 24V water pump, comes with a special U-shape water intake shell, which makes this return pump can be used in low water level.
A powerful water pump for fish tanks, aquariums, ponds, fountains, waterfalls, sump, hydroponics, irrigation use.
Aquarium Water Pump Features:
– Ultra quiet, runs at low vibration.
– Auto shut off when no water is sensed.
– High performance, energy saving up to 65% and safe operation.
– With 71 settings external controller, easy to control the flow rate from 30% to 100%.
– Can be used internally or externally, for salt-water or fresh water use.
– Comes with 2 kinds of water intake shells, the lowest water level can be 0.8 inch.
– Durable for long time use, with anti-resistant ceramic shaft, magnetic drive.
– Easy to disassemble it by hand for cleaning, the impeller is removable.
Directions for use
1. Max working water depth is 5ft. Please check and clean the pump regularly.
2. Prohibit to use the pump in flammable liquids. Working water temps: 34-95 Fahrenheit degrees.
3. The pump will stop working when input voltage is too high, upon no water, impeller blocked, to restart the pump please re-plug the power.
4. The controller has memory function for the flow rater, if the power goes out the controller will go back to the last setting.
5. Don’t let the pump run dry, it will damage the motor. When use the pump internally, please keep the pump fully submersible in water before plug in power.
When use the pump externally, make sure there are full of water in the pump body and the pipes before plug in power.
6. If you find the pump is failed to pump water at the beginning, please try to unplug and re-plug the power to get rid of the air inside the pump,
repeat that for several times then the pump will work normally.
- 🐠【Demension & Specifications】Powerful and ultra quiet water return pump. Input voltage: 100-240V 50/60HZ. Output voltage: DC 24V. Pump Dimension (LxWxH): 6.2 x 3.1 x 5 inch. Cord length from the pump to controller is 6ft, the power cord length is 6.6ft. Wattage/flow/head: 25W/800GPH/9.8ft head. Please look the chart for each models
- 🐠【 Auto Shut Off When No Water】 Plug the power to turn this water pump on, unplug the power to turn it off. It is protected in case there’s no water, the pump will auto shut off when no water is sensed or water gets too low. Comes with 2 kinds of removable water intake screens,1 for normal water level and the other for low water level (higher than 0.8inch)
- 🐠【Adjustable Flow Speed】This aquarium water pump has an external Led display controller, with 71 flow speed settings, you can control the flow rate from 30% to 100% of the top speed flow. 3 buttons on the controller: “Up” “Down” “Pause”
- 🐠【Internal & External Use】 Hygger dcp water pump can be ran externally or be submerged. Please note the controller is not waterproof, must be placed indoors. The pond pump comes with screws, o rings, pipe connection fittings. You can connect 1″ or 3/4″ pipes to this pond pump
- 🐠【Durable Water Pump】Wear-resistant ceramic shaft and magnetic drive makes this water pump a long service life. No copper element, can be used for fresh water or salt water